Awei Y385 Wireless Portable Outdoor Bluetooth Speaker Hi-Fi Music Sound Box
Couldn't load pickup availability
The Awei Y385 is a compact and portable wireless Bluetooth speaker designed for outdoor use, delivering Hifi stereo sound with dynamic RGB lighting. Featuring Bluetooth 5.0 technology and support for True Wireless Stereo (TWS) pairing, it allows for an immersive audio experience. Its lightweight and handy design makes it an ideal companion for travel and sports activities.
Lightweight and handy design for easy portability.
Package Contents
Please check the box for the following items:
- Awei Y385 Wireless Outdoor Bluetooth Speaker
- USB Data Cable (Type-C)
- User Manual
Specifications
| Feature | Detail |
|---|---|
| Bluetooth Version | 5.1+BR+EDR+BLE |
| Supported Protocols | A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, ATT, GAP, G ATT, RFCOMM, SDP, L2CAP |
| Maximum Power | 7.7W |
| Rated Power (Horn) | 4W |
| Receiving Sensitivity | < -85dBm |
| Horn Diameter | 40mm |
| Impedance | 4Ω |
| Bluetooth Operating Frequency | 2402MHz~2480MHz |
| Frequency Response Range | 90Hz~16KHz |
| Play Time | 5~6 hours (at 70% volume) |
|
|
| Battery Capacity | 500mAh / 3.7V (Li-polymer battery) |
| Charging Time | About 1.5~2 hours |
| Charging Interface | Type-C (DC5V, 500MA) |
| Dimensions (H x W x D) | 149mm x 90mm x 43mm |
| Net Weight | About 202g |
| Maximum Wireless Range | <10m |
| Sound Modes | 3D Surround Sound Mode, Stereo Sound Mode |
| Built-in Microphone | Yes |
| Voice Control | Yes |
| Active Noise-Cancellation | Passive |
| Certification | CE |
| Supported Sound Sources | Bluetooth, Micro-SD Card, U Disk |
Detailed technical specifications.
Setup Guide
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided Type-C USB cable to the speaker's charging port and the other end to a 5V/500mA USB power source (e.g., wall adapter, computer USB port). The charging time is approximately 1.5 to 2 hours.
Charge the speaker using the Type-C port.
2. Power On/Off
- Power On: Press and hold the power button for a few seconds until the indicator light turns on and you hear a startup sound.
- Power Off: Press and hold the power button again for a few seconds until the indicator light turns off.
3. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (the indicator light will typically flash).
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Awei Y385" from the list of found devices.
- Once connected, the speaker will indicate a successful pairing, and the indicator light will stop flashing.
4. True Wireless Stereo (TWS) Pairing
To achieve a surround stereo effect, you can pair two Awei Y385 speakers together:
- Ensure both Y385 speakers are powered on and not connected to any other Bluetooth device.
- On one of the speakers (this will be the primary speaker), double-press the power button (or a dedicated TWS button if available, refer to speaker controls). The speaker will enter TWS pairing mode.
- The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation tone.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in step 3. Both speakers will then play audio in stereo.
Connect two speakers for an enhanced stereo experience.
5. Other Sound Sources
The Awei Y385 also supports audio playback from Micro-SD cards and U Disk drives. Simply insert the Micro-SD card into the designated slot or the U Disk into the USB port. The speaker will automatically detect and play audio files.
Multiple input options for versatile music playback.
Operating Instructions
Music Playback
- Play/Pause: Press the Play/Pause button once.
- Volume Up: Press the Volume Up (+) button.
- Volume Down: Press the Volume Down (-) button.
- Next Track: Press and hold the Volume Up (+) button.
- Previous Track: Press and hold the Volume Down (-) button.
Hands-Free Calling
When connected to your phone via Bluetooth, the speaker can be used for hands-free calls:
- Answer Call: Press the Play/Pause button once when an incoming call rings.
- End Call: Press the Play/Pause button once during a call.
- Reject Call: Press and hold the Play/Pause button for 2 seconds when an incoming call rings.
RGB Lighting
The speaker features dynamic RGB lighting. Refer to the physical buttons on your speaker for specific controls to change lighting modes or turn them off/on. Typically, a dedicated light button or a long press on a specific button controls this feature.
